If you do not have an Ethernet Interface, or network card, installed in your system, then you will need to use the USB Port on your computer. We recommend against using USB as it consumes system resources affecting system performance.
MACINTOSH SYSTEMS ARE NOT COMPATIBLE WITH USB INTERFACE ON DYNALINK RTA1320. THEY MUST USE ETHERNET ONLY.
Before you plug the device into your system, you will need to install the drivers (some systems allow you to install the software when the device is plugged in first). The drivers are located on the CD.
Double click the Setup file in the appropriate folder on the CD. You will see the following screens depending on the Windows Operating System you are using.
An installation shield will appear as follows.
rta1320_p3_win2k_usb1
Click Next on the following screen.
rta1320_p3_win2k_usb2
Click Finish when the installation completes.
rta1320_p3_win2k_usb3
Plug the USB cable between your router and PC. You will see the following screen as it automatically installs the USB Drivers.
rta1320_p3_win2k_usb4
After this, you will log into the ADSL Device using a Web Interface through your Internet Browser (eg, Internet Explorer 5 or above).
An InstallShield Wizard will appear. Please wait for a moment.
rta1320_p4_winXP_usb1
When the welcome screen appears, click Next for next step.
rta1320_p4_winXP_usb2
When the InstallShield Wizard Complete appears, click Finish.
rta1320_p4_winXP_usb3
The system will detect the USB driver automatically.
rta1320_p4_winXP_usb4
The system is trying to find proper driver for your router and copying the files
Automatically.
rta1320_p4_winXP_usb5
After the file copying is finished, a completing message will appear.
rta1320_p4_winXP_usb6
After this, you will log into the ADSL Device using a Web Interface through your Internet Browser (eg, Internet Explorer 5 or above).